Used Slitters/ machinery

1 Valmet 2.300 mm, Slitter Rewinder for grades 40 to 400 gsm, modernized 2006 & 2010 – Wotol.com

JYLHA (Later name VALMET) Slitter Rewinder Machine (made in Finland, location Scandinavia)
2.300 mm slitter rewinder, ok for paper & board 40 to 400 gsm, modernized 2006 & 2010

Details:

– unwinder roll width 400 – 2300 mm, unwinder paper – cylinders surfaces 2450 mm
– unwinder takes reel floor level max dia 1700, core sizes 3”, 6”
– slitting unit Mario Cotta knife holders 14 pcs, + 25 pcs multibottom knives dia 290 mm, cut pitch 5 mm !!!

– manual displacement knife holders

– re-winder dia max 1500 mm
– designed for paper and carton 40 – 360 g/m2, (abt 400 g/m2 folding box carton ok to be slit too )
– practical work speed 1000 m/min depending paper.
– side trimmings
– kip system on floor level from rewound rolls (no elevator nor crane needed)

– original year 1985, modernized 2006 new COTTA cutting sets + new logic Simatic drive and machine control etc

– small floor space needed max 7 x 6 meter, height under 300 cm

– safety devices modernized 2010 over the machine

– standing at original position in Factory – (not possible make demo). Stopped February 2017
– full documentation available
– power 240/400 V, 50 Hz

Continue reading
Used Slitters/ machinery

1 Valmet 2.300 mm, Slitter Rewinder for grades 40 to 400 gsm, modernized 2006 & 2010 – Wotol.com

JYLHA (Later name VALMET) Slitter Rewinder Machine (made in Finland, location Scandinavia)
2.300 mm slitter rewinder, ok for paper & board 40 to 400 gsm, modernized 2006 & 2010

Details:

– unwinder roll width 400 – 2300 mm, unwinder paper – cylinders surfaces 2450 mm
– unwinder takes reel floor level max dia 1700, core sizes 3”, 6”
– slitting unit Mario Cotta knife holders 14 pcs, + 25 pcs multibottom knives dia 290 mm, cut pitch 5 mm !!!

– manual displacement knife holders

– re-winder dia max 1500 mm
– designed for paper and carton 40 – 360 g/m2, (abt 400 g/m2 folding box carton ok to be slit too )
– practical work speed 1000 m/min depending paper.
– side trimmings
– kip system on floor level from rewound rolls (no elevator nor crane needed)

– original year 1985, modernized 2006 new COTTA cutting sets + new logic Simatic drive and machine control etc

– small floor space needed max 7 x 6 meter, height under 300 cm

– safety devices modernized 2010 over the machine

– standing at original position in Factory – (not possible make demo). Stopped February 2017
– full documentation available
– power 240/400 V, 50 Hz

Continue reading
Used Slitters/ machinery

1 Corsini, Italy 1750 mm , Slitter Rewinder for Cardboard Cores, with 2 carrier drums, of 2007, like new, used only 6 months! – Wotol.com

Brand: Corsini, Italy
Used Corsini 1750 mm Slitter Rewinder for Cardboard Cores, with 2 carrier drums, of 2007 !

LIKE NEW, WAS USED ONLY 6 MONTHS!
dismantled & stored

Details:
Make: Corsini, Italy
Working width: 1750mm wide

Paper width: 1750mm

Max. 600 gsm

Operating speed: 600m/min

Design speed: 800m/min

Max. rewind: 1500mm

Max. unwind: 2000mm

Min. cutting: 50 mm

knifes: 27 units

machine mainly designed for making strips for core manufacturing

Machine shell unwind stand

Brake generator

Air shafts to run jumbo rolls with cardboard cores

Slitting section with 27 knifes

One spreader roll before and one after the slitting section

Twin carrier drums dia. 450x1850mm

Separate drive on each drum

Rider roll with drive, dia. 220x1780mm

Reel ejector and lowering table

AC drives

Continue reading
Used Slitters/ machinery

1 Corsini, Italy 1750 mm , Slitter Rewinder for Cardboard Cores, with 2 carrier drums, of 2007, like new, used only 6 months! – Wotol.com

Brand: Corsini, Italy
Used Corsini 1750 mm Slitter Rewinder for Cardboard Cores, with 2 carrier drums, of 2007 !

LIKE NEW, WAS USED ONLY 6 MONTHS!
dismantled & stored

Details:
Make: Corsini, Italy
Working width: 1750mm wide

Paper width: 1750mm

Max. 600 gsm

Operating speed: 600m/min

Design speed: 800m/min

Max. rewind: 1500mm

Max. unwind: 2000mm

Min. cutting: 50 mm

knifes: 27 units

machine mainly designed for making strips for core manufacturing

Machine shell unwind stand

Brake generator

Air shafts to run jumbo rolls with cardboard cores

Slitting section with 27 knifes

One spreader roll before and one after the slitting section

Twin carrier drums dia. 450x1850mm

Separate drive on each drum

Rider roll with drive, dia. 220x1780mm

Reel ejector and lowering table

AC drives

Continue reading
Used Slitters/ machinery

1 Valmet 2.300 mm, Slitter Rewinder for grades 40 to 400 gsm, modernized 2006 & 2010 – Wotol.com

JYLHA (Later name VALMET) Slitter Rewinder Machine (made in Finland, location Scandinavia)
2.300 mm slitter rewinder, ok for paper & board 40 to 400 gsm, modernized 2006 & 2010

Details:

– unwinder roll width 400 – 2300 mm, unwinder paper – cylinders surfaces 2450 mm
– unwinder takes reel floor level max dia 1700, core sizes 3”, 6”
– slitting unit Mario Cotta knife holders 14 pcs, + 25 pcs multibottom knives dia 290 mm, cut pitch 5 mm !!!

– manual displacement knife holders

– re-winder dia max 1500 mm
– designed for paper and carton 40 – 360 g/m2, (abt 400 g/m2 folding box carton ok to be slit too )
– practical work speed 1000 m/min depending paper.
– side trimmings
– kip system on floor level from rewound rolls (no elevator nor crane needed)

– original year 1985, modernized 2006 new COTTA cutting sets + new logic Simatic drive and machine control etc

– small floor space needed max 7 x 6 meter, height under 300 cm

– safety devices modernized 2010 over the machine

– standing at original position in Factory – (not possible make demo). Stopped February 2017
– full documentation available
– power 240/400 V, 50 Hz

Continue reading
Used Slitters/ machinery

1 Valmet 2.300 mm, Slitter Rewinder for grades 40 to 400 gsm, modernized 2006 & 2010 – Wotol.com

JYLHA (Later name VALMET) Slitter Rewinder Machine (made in Finland, location Scandinavia)
2.300 mm slitter rewinder, ok for paper & board 40 to 400 gsm, modernized 2006 & 2010

Details:

– unwinder roll width 400 – 2300 mm, unwinder paper – cylinders surfaces 2450 mm
– unwinder takes reel floor level max dia 1700, core sizes 3”, 6”
– slitting unit Mario Cotta knife holders 14 pcs, + 25 pcs multibottom knives dia 290 mm, cut pitch 5 mm !!!

– manual displacement knife holders

– re-winder dia max 1500 mm
– designed for paper and carton 40 – 360 g/m2, (abt 400 g/m2 folding box carton ok to be slit too )
– practical work speed 1000 m/min depending paper.
– side trimmings
– kip system on floor level from rewound rolls (no elevator nor crane needed)

– original year 1985, modernized 2006 new COTTA cutting sets + new logic Simatic drive and machine control etc

– small floor space needed max 7 x 6 meter, height under 300 cm

– safety devices modernized 2010 over the machine

– standing at original position in Factory – (not possible make demo). Stopped February 2017
– full documentation available
– power 240/400 V, 50 Hz

Continue reading