JYLHA (Later name VALMET) Slitter Rewinder Machine (made in Finland)
– unwinder roll width 400 – 2300 mm, unwinder paper – cylinders surfaces 2450 mm
– unwinder takes reel floor level max dia 1700, core sizes 3”, 6”
– slitting unit Mario Co…
Tag: used slitter
1 Valmet, Jylha 2300 mm, compact & 1.000m/mn slitter rewinder for gsm 40-360 gsm – Wotol.com
JYLHA (Later name VALMET) Slitter Rewinder Machine (made in Finland)
– unwinder roll width 400 – 2300 mm, unwinder paper – cylinders surfaces 2450 mm
– unwinder takes reel floor level max dia 1700, core sizes 3”, 6”
– slitting unit Mario Co…
1 Valmet, Jylha 2300 mm, compact & 1.000m/mn slitter rewinder for gsm 40-360 gsm – Wotol.com
JYLHA (Later name VALMET) Slitter Rewinder Machine (made in Finland)
– unwinder roll width 400 – 2300 mm, unwinder paper – cylinders surfaces 2450 mm
– unwinder takes reel floor level max dia 1700, core sizes 3”, 6”
– slitting unit Mario Co…
1 Beloit 2440 mm , FAMPA PH 25 slitter rewinder, in operation – Wotol.com
Used 2440 mm BELOIT FAMPA PH 25 slitter rewinder, in operation
– Year of production : 1983
– for the cutting of paper to rolls to the paper cores
– max is possible to cut 9 rolls
– the rolls of different widths, set up by circular knife…
1 Beloit 2440 mm , FAMPA PH 25 slitter rewinder, in operation – Wotol.com
Used 2440 mm BELOIT FAMPA PH 25 slitter rewinder, in operation
– Year of production : 1983
– for the cutting of paper to rolls to the paper cores
– max is possible to cut 9 rolls
– the rolls of different widths, set up by circular knife…
1 Corsini, Italy 1750 mm , Slitter Rewinder for Cardboard Cores, with 2 carrier drums, of 2007, like new, used only 6 months! – Wotol.com
Brand: Corsini, Italy
Used Corsini 1750 mm Slitter Rewinder for Cardboard Cores, with 2 carrier drums, of 2007 !
LIKE NEW, WAS USED ONLY 6 MONTHS!
dismantled & stored
Details:
Make: Corsini, Italy
Working width: 1750mm wide
Paper width: 1750mm
Max. 600 gsm
Operating speed: 600m/min
Design speed: 800m/min
Max. rewind: 1500mm
Max. unwind: 2000mm
Min. cutting: 50 mm
knifes: 27 units
machine mainly designed for making strips for core manufacturing
Machine shell unwind stand
Brake generator
Air shafts to run jumbo rolls with cardboard cores
Slitting section with 27 knifes
One spreader roll before and one after the slitting section
Twin carrier drums dia. 450x1850mm
Separate drive on each drum
Rider roll with drive, dia. 220x1780mm
Reel ejector and lowering table
AC drives
Continue reading1 Corsini, Italy 1750 mm , Slitter Rewinder for Cardboard Cores, with 2 carrier drums, of 2007, like new, used only 6 months! – Wotol.com
Brand: Corsini, Italy
Used Corsini 1750 mm Slitter Rewinder for Cardboard Cores, with 2 carrier drums, of 2007 !
LIKE NEW, WAS USED ONLY 6 MONTHS!
dismantled & stored
Details:
Make: Corsini, Italy
Working width: 1750mm wide
Paper width: 1750mm
Max. 600 gsm
Operating speed: 600m/min
Design speed: 800m/min
Max. rewind: 1500mm
Max. unwind: 2000mm
Min. cutting: 50 mm
knifes: 27 units
machine mainly designed for making strips for core manufacturing
Machine shell unwind stand
Brake generator
Air shafts to run jumbo rolls with cardboard cores
Slitting section with 27 knifes
One spreader roll before and one after the slitting section
Twin carrier drums dia. 450x1850mm
Separate drive on each drum
Rider roll with drive, dia. 220x1780mm
Reel ejector and lowering table
AC drives
Continue reading1 Valmet 2.300 mm, Slitter Rewinder for grades 40 to 400 gsm, modernized 2006 & 2010 – Wotol.com
JYLHA (Later name VALMET) Slitter Rewinder Machine (made in Finland, location Scandinavia)
2.300 mm slitter rewinder, ok for paper & board 40 to 400 gsm, modernized 2006 & 2010
Details:
– unwinder roll width 400 – 2300 mm, unwinder paper – cylinders surfaces 2450 mm
– unwinder takes reel floor level max dia 1700, core sizes 3”, 6”
– slitting unit Mario Cotta knife holders 14 pcs, + 25 pcs multibottom knives dia 290 mm, cut pitch 5 mm !!!
– manual displacement knife holders
– re-winder dia max 1500 mm
– designed for paper and carton 40 – 360 g/m2, (abt 400 g/m2 folding box carton ok to be slit too )
– practical work speed 1000 m/min depending paper.
– side trimmings
– kip system on floor level from rewound rolls (no elevator nor crane needed)
– original year 1985, modernized 2006 new COTTA cutting sets + new logic Simatic drive and machine control etc
– small floor space needed max 7 x 6 meter, height under 300 cm
– safety devices modernized 2010 over the machine
– standing at original position in Factory – (not possible make demo). Stopped February 2017
– full documentation available
– power 240/400 V, 50 Hz
1 Valmet 2.300 mm, Slitter Rewinder for grades 40 to 400 gsm, modernized 2006 & 2010 – Wotol.com
JYLHA (Later name VALMET) Slitter Rewinder Machine (made in Finland, location Scandinavia)
2.300 mm slitter rewinder, ok for paper & board 40 to 400 gsm, modernized 2006 & 2010
Details:
– unwinder roll width 400 – 2300 mm, unwinder paper – cylinders surfaces 2450 mm
– unwinder takes reel floor level max dia 1700, core sizes 3”, 6”
– slitting unit Mario Cotta knife holders 14 pcs, + 25 pcs multibottom knives dia 290 mm, cut pitch 5 mm !!!
– manual displacement knife holders
– re-winder dia max 1500 mm
– designed for paper and carton 40 – 360 g/m2, (abt 400 g/m2 folding box carton ok to be slit too )
– practical work speed 1000 m/min depending paper.
– side trimmings
– kip system on floor level from rewound rolls (no elevator nor crane needed)
– original year 1985, modernized 2006 new COTTA cutting sets + new logic Simatic drive and machine control etc
– small floor space needed max 7 x 6 meter, height under 300 cm
– safety devices modernized 2010 over the machine
– standing at original position in Factory – (not possible make demo). Stopped February 2017
– full documentation available
– power 240/400 V, 50 Hz
1 1.650 mm, Slitter rewinder H7, Tr-G1 type, of year 2000 – Wotol.com
1.650 mm Slitter rewinder H7 mod. Tr-G1 of 2000
Year:2000
Reel: 1650 mm
Diam.max unwinder: 1200mm
Diam.max rewinder: 1200mm
Mechanical speed: 500mt/1′
Kw installed 45
Ampere 175